Bunsen Burner – Digital
₹100.00
Description
Features:
● Conically shaped refractory crucible
● Stainless Steel cylindrical body SS 304 with mirror finish
● Control Panel made of SS 304 with mirror finish
● Maximum working temp. 500 ° C. Approximate Temperature.
● The temperature is controlled by digital PID temperature controller.
● Fuse fitted on backside for overload protection.(SAFETY)
● Works at 1 Phase 230 Volts 50 Hz
Specifications:
● Work at 230 Volts AC only
● Maximum working temp. 500 ° C
● Shape Refractory crucible
● Apparatus consists of heating element
Related products
Bod Incubator
Description
We are very well skilled in the manufacture, supply, distribution of Bod Incubator - GMP Model. The offered biochemical oxygen demand incubator is an ideal storage for sensitive cultures. Our offered incubator is provided with very strong inner and outer cabinets. The offered incubator is provided with eco friendly refrigeration technology of CFC compressor. Our offered incubator maintains a high accuracy over a range of temperature.
Features:
● Non volatile memory for the set point
● Castor wheels
● Acrylic doors
Specifications:
● Interior cabinet: SS 304
● Exterior cabinet: SS 304
● Temperature range: 5 ° C to 60 ° C
● Accuracy/ Uniformity: +- 0.5 ° C/ +- 1 ° C
● Safety: Provided to cut off heater above 70 ° C
● Display/ Control: PID Controller with resolution 0.1 ° C
● Accuracy: +- 0.5 ° C with Non-Volatile storage memory for the set Point
● Refrigeration: CFC free compressor utilizing R134a Eco-friendly refrigeration
● Observation: Inner transparent acrylic door and outer door key lockable
● Feet: Castor wheels
● Mains Power: 230 V/50 Hz AC
Rivotek Hybridization Oven
Description
Specifications:
● Interior Material - SS
● Exterior Material - MS coated with Epoxy Powder paint.
● Temperature range (ambient +5) to 90 ° C is Controlled by Solid -state time proportional
temperature controller cum digital display using PT 100 sensor.
● A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed
or removed from the rotor mechanism.
● One bottle can be taken out without removing the carrier. The carrier rotates with the
Bottles parallel to the door at variable speed of 2 - 15 RPM.
● Observation Viewing Glass Window is provided
● Permanent Magnet Geared DC motor with 25 mm dia. Motion
● Carrier speed 2- 15 RPM
Bod Incubator Shaker
Description
BOD Incubator Shaker, Rivotek
In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast.
SPECIFICATIONS :
Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated.
Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature.
Display Control : Microprocessor based PID control of by using PT 100 Sensor.
Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm.
Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature.
Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C.
Observation : Transparent toughened glass door and outer door key lockable.
Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel.
Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration.
Feet : Castor wheels.
Mains Power : Works on 230 V AC single phase 50Hz.
SPECIFICATIONS :
Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output.
RPM : 50 to 200 RPM. ( without Load Approximately).
Volt Meter : With LCD Display for better view.
Rivotek Ultrasonic Cleaner
Description
Specifications:
● Bath Material: SS 304
● Outer Body Material & Lid: SS304
● Ultrasonic Generator: - Advanced latest MOSFET/IGBT based SMPS
● Frequency:- 30 ± 3 KHz
● Transducer: - Imported make PZT crystals bonded on the base of the tank with weld bond technique
● SS Basket:- Provided
● Timer-Digital Timer is provided
vElectric supply: - 230V/ 50Hz AC, single phase.
● Drain: - Drain valve provided at the rear side of the tank (not included for 1.5 liter model)
Rivotek Incubator Shaker (RT-PLUS)- STD Model
Description
Specifications:
Outer Construction:MS powder coated.
● Inner Construction : The inner walls of the incubator will be pasted with laminated sheet to Avoid heat loss.
● Samples viewing: Transparent glass window allows unobstructed view of the
● Inbuilt Lighting: Built in lightning attachment with low wattage provided with External
Switch on the front panel.
● Chamber Size in mm: 500 x 510 x 500 mm
● Temperature range: (5 ° C above Ambient ) to 60 ° C, Accuracy/ Uniformity ± 0.5 ° C/ ± 1 ° C.
● Display Control : Microprocessor based PID control of Accuracy ± 0.1 ° C by using PT 100 Sensor.
● Speed Indicator: Digital Speed Indicator on the front panel.
● Drive Mechanism: VFD Drive
● Amplitude: 25 mm dia Orbital motion.
● Shaking Speed: 20 – 200 Orbital strokes per min (without load)
Riviera Hot Plate (Rectangular) – Thermostatic Control
Description
We have been actively engaged in the manufacture, supply, distribution Hot Plate (Rectangular) - Thermostatic Control. The offered hot plate is provided with a rectangular surface heating plate. Our offered hot plate is made from cast iron which is powder coated for making it corrosion resistance. The offered hot plate has a thermostatic control for the temperature control. Our offered hot plate is available at a very affordable price.
Features:
● Corrosion resistant
● Electric shock proof
● Beneficial for laboratory work
Other Details:
● Rectangular surface heating plate
● Body made of MS Powder coated
● Top plate made of cast iron
● Temp. up to 350 ° C
● Fitted with Thermostatic Control
Touch Screen Ultrasonic Processor (Sonicator)
Description
Touch Screen Ultrasonic Processor (Sonicator), Rivotek
This is the new generation series of probe sonicator with uniform ultrasonic frequency 20khz and 30khz. The enclosure is soundproof with portable design. The height adjustment mechanism adds more ergonomics to the design. The TFT touch screen display with user friendly interface and PLC are programmed in a way to give advance features such as Power Amplitude control, 8 Sample processing profiles, data logging of date and Time vs temperature. This equipment is designed to handle temperature-controlled sonication tasks with temperature range from Ambient 28 ° C to 70 ° C. It also has feature of programmable timer up to 99 minutes. This product finds its application in wide range of industries including pharmaceuticals, consmetics, food processing ,nano technology labs , defence Sectors amongst others.