Peristaltic Pump
₹100.00
Description
Specifications:
● Body Material – MS Painted with Epoxy Powder.
● Single Channel
● Stage made up of cast aluminum with Black epoxy powder paint
● Rollers of Cast Nylon
● Supplied with 1 meter transparent silicon tube
● Reversible flow control
● Pumps different flow rate are available
Related products
Rivotek Incubator Shaker (RT-PLUS)- STD Model
Description
Specifications:
Outer Construction:MS powder coated.
● Inner Construction : The inner walls of the incubator will be pasted with laminated sheet to Avoid heat loss.
● Samples viewing: Transparent glass window allows unobstructed view of the
● Inbuilt Lighting: Built in lightning attachment with low wattage provided with External
Switch on the front panel.
● Chamber Size in mm: 500 x 510 x 500 mm
● Temperature range: (5 ° C above Ambient ) to 60 ° C, Accuracy/ Uniformity ± 0.5 ° C/ ± 1 ° C.
● Display Control : Microprocessor based PID control of Accuracy ± 0.1 ° C by using PT 100 Sensor.
● Speed Indicator: Digital Speed Indicator on the front panel.
● Drive Mechanism: VFD Drive
● Amplitude: 25 mm dia Orbital motion.
● Shaking Speed: 20 – 200 Orbital strokes per min (without load)
Portable Oil free vaccum Pumps
Description
Salient Features:
● No Lubrication required.
● Noiseless.
● Absolutely portable.
● Totally oil free construction.
● Practically maintenance free.
● All parts made from Special graded aluminium die cast material for
light weight and good strength.
● Diaphragms are made of special 2 ply Nylon, reinforced neoprene rubber,.
● Special diaphragms are available (Teflon, Viton) on request at extra cost.
● Valves made of SS 316 material.
● Built in micro suction filter.
● Extra Large bearings for trouble free and smooth running.
● Pumps available with single as well as three phase motors.
● Pumps available with flame proof motors (Cat. No. 7001 0012).
● Pumps available with 12/24/48 volts DC supply (Cat no.7001 0011).
Please specify voltage while ordering.
● Pumps available with Chemical resistive parts( PP, Teflon contact parts)
(Cat. No. 7001 0007/8)
Digital Heating Mantles
Description
Construction of these laboratory heating mantle are similar to standard heating mantle but the temperature is controlled by digital temperature controller-cum- indicator.
These laboratory heating mantles are designed to take only one size of flask. Various sizes are available to fit around bottom flasks of capacity from 100 ml to 2000 ml. The snug fit of the heating surface, which is in close contact with the flask, ensures good thermal efficiency.
Rivotek Hybridization Oven
Description
Specifications:
● Interior Material - SS
● Exterior Material - MS coated with Epoxy Powder paint.
● Temperature range (ambient +5) to 90 ° C is Controlled by Solid -state time proportional
temperature controller cum digital display using PT 100 sensor.
● A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed
or removed from the rotor mechanism.
● One bottle can be taken out without removing the carrier. The carrier rotates with the
Bottles parallel to the door at variable speed of 2 - 15 RPM.
● Observation Viewing Glass Window is provided
● Permanent Magnet Geared DC motor with 25 mm dia. Motion
● Carrier speed 2- 15 RPM
