Riviera Hot Plate (Rectangular) – Thermostatic Control

Description Specifications: ●  Ultrasonic Generator ●  Solid state design with auto-tuning ●  Frequency 30 KHz +- 3 KHz (Factory Set) ●  Digital Cyclic Timer is provided ●  Probe Titanium probe tip ●  Ultrasonic Power 120 / 250 Watts ●  Electric Supply 230 V AC, 50Hz, single phase

Description Specifications: Outer Construction:MS powder coated. ●   Inner Construction : The inner walls of the incubator will be pasted with laminated sheet to Avoid heat loss. ●   Samples viewing: Transparent glass window allows unobstructed view of the ●   Inbuilt Lighting: Built in lightning attachment with low wattage provided with External Switch on the front panel. ●   Chamber Size in mm: 500 x 510 x 500 mm ●   Temperature range: (5 ° C above Ambient ) to 60 ° C, Accuracy/ Uniformity ± 0.5 ° C/ ± 1 ° C. ●   Display Control : Microprocessor based PID control of Accuracy ± 0.1 ° C by using PT 100 Sensor. ●   Speed Indicator: Digital Speed Indicator on the front panel. ●   Drive Mechanism: VFD Drive ●   Amplitude: 25 mm dia Orbital motion. ●   Shaking Speed: 20 – 200 Orbital strokes per min (without load)

Description Specifications: ●  Outer body – MS powder coated for STD Model & SS 304 for GMP Model ●  Inner body – Ceramic Muffle Construction for STD Model & GMP model ●  Temperature Range up to 1100 ° C, Working temperature up to 950 ° C ●  Provided with digital temperature controller/indicator with accuracy ± 5.0 ° C. ●  Kanthal wire for longer life. ●  The furnace is designed with high degree of insulation consisting of four layers resulting in very low heat losses and lesser atmospheric heating as under: a) Ceramic wool blanket b) Mineral wool c) Ceramic bricks, light in weight and of better quality ●  Electrically operated on 230V/50Hz

Description BOD Incubator Shaker, Rivotek In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast. SPECIFICATIONS : Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated. Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature. Display Control : Microprocessor based PID control of by using PT 100 Sensor. Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm. Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm. Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature. Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C. Observation : Transparent toughened glass door and outer door key lockable. Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel. Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration. Feet : Castor wheels. Mains Power : Works on 230 V AC single phase 50Hz. SPECIFICATIONS : Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle. VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output. RPM : 50 to 200 RPM. ( without Load Approximately). Volt Meter : With LCD Display for better view.