| Cat. No | Dimension in ( inches) | Dimension in (cm) | Rating in (KW) |
|---|---|---|---|
| 50020 0008 | 8″ | 20 | 1.2 kw |
| 50020 0009 | 9″ | 22 | 1.5 kw |
| 50020 0012 | 12″ | 30 | 2.0 kw |
Riviera Hot Plate (Round) – Thermostatic Control
₹100.00
Description
We are dealing in the manufacture, supply, distribution of Hot Plate (Round) – Thermostatic Control. The offered hot plate is provided with a round surface heating plate material. Our offered hot plate is fitted with thermostat controller for measuring and maintaining the temperature. The offered hot plate is able to function over a wide range of temperature. Our offered hot plate is an electric energy efficient device.
Features:
● Control of temperature overshoot
● Accurate proportional temperature control
● Long lasting
Specifications:
● Round surface heating plate
● Body made of MS Powder coated
● Top Plate made of cast iron
● Temp. upto 350 ° C
● Fitted with Thermostatic Control
Description
Related products
Portable Oil free vaccum Pumps
Description
Salient Features:
● No Lubrication required.
● Noiseless.
● Absolutely portable.
● Totally oil free construction.
● Practically maintenance free.
● All parts made from Special graded aluminium die cast material for
light weight and good strength.
● Diaphragms are made of special 2 ply Nylon, reinforced neoprene rubber,.
● Special diaphragms are available (Teflon, Viton) on request at extra cost.
● Valves made of SS 316 material.
● Built in micro suction filter.
● Extra Large bearings for trouble free and smooth running.
● Pumps available with single as well as three phase motors.
● Pumps available with flame proof motors (Cat. No. 7001 0012).
● Pumps available with 12/24/48 volts DC supply (Cat no.7001 0011).
Please specify voltage while ordering.
● Pumps available with Chemical resistive parts( PP, Teflon contact parts)
(Cat. No. 7001 0007/8)
Rivotek Ultrasonic Cleaner
Description
Specifications:
● Bath Material: SS 304
● Outer Body Material & Lid: SS304
● Ultrasonic Generator: - Advanced latest MOSFET/IGBT based SMPS
● Frequency:- 30 ± 3 KHz
● Transducer: - Imported make PZT crystals bonded on the base of the tank with weld bond technique
● SS Basket:- Provided
● Timer-Digital Timer is provided
vElectric supply: - 230V/ 50Hz AC, single phase.
● Drain: - Drain valve provided at the rear side of the tank (not included for 1.5 liter model)
Vacuum Oven (Rectangular)
Description
We have been engaged in the manufacture, supply, distribution Vacuum Oven (Rectangular) - STD Model. The offered oven can withstand heavy usage in a minimal drawdown time. Our offered vacuum oven is provided with a high temperature resistant glass window for outside visual observation. The offered vacuum oven has a LED display for the indication of vacuum. Our offered vacuum oven is available at very affordable price.
Features:
● Low power consumption
● Thick outer and inner steel body
● Corrosion resistant powder coating
Specifications:
● Outer Body: MS duly powder coated
● Inner Body: SS304
● Temperature range: 50 ° C to 200 ° C.
● Maximum vacuum: up to 760 mm of mercury, Digital Vacuum Indicator with LED Display
● Resolution: 1 mm Hg
● Accuracy: +- 1 mm Hg
● Digital temperature controller/ indicator with resolution: 1 ° C
● Accuracy: +-1 ° C
● Temperature resistant toughened glass observation window
● Vacuum gauge with vacuum release valve and nozzle
● Silicon door gasket and positive door clamping arrangement
● Electrically operated: 230 V/50 Hz
Rivotek Autoclave Fully Automatic, GMP Model
Description
Features:
● Low water level cut off system
● Pressure gauge fitment configuration
● Provided with steam releasing safety valves
Specifications:
● Double body has single chamber for steam and water, covered externally by outer shell
● Inner body heavy gauge SS316 Outer shell SS304
● Lid made up of thick SS316 designed to withstand pressure: up to 30PSI
● Operating pressure: 15 to 22 PSI
● Complete unit with automatic initial air purging, digital temperature controller and indicator: 0.1 ° C resolution, with electronic digital timer range 0-99 minutes
● Autoclaving time cycle automatically starts when set temperature is achieved
● Automatic steam release when autoclaving cycle completes
● Low water level cutoff system prevents heater from burning out
● Fitted with pressure gauge, safety valve and steam release valve
● Factory set: 121.0 ° C (15 PSI) with built-in digital adjustable timer with auto cut-off
● Electrically operated: 230 V AC/50 Hz
Laboratory Hot Air Oven
Description
We have come with the Laboratory Oven - Std Model for our customers. The offered ovens are widely used for annealing, die-bond curing, drying, Polyimide baking, sterilizing and other industrial laboratory functions. Along with a high operating temperature, the offered ovens come with a fan convection for rapid heating & excellent uniformity. Moreover, the stainless steel liners have a good resistance to chemical damages.
Features:
● High operating temperature
● Comes with rapid heating property
● Resistance to chemical damages
Other Details:
● Double walled construction
● Outer Body material is MS duly powder coated
● Inner Body- SS LM 304
● Gap between 2 walls filled with glass wool
● Supplied with SS trays
● Temperature range 5 ° C above ambient (room Temperature) to 250 ° C
● Forced air circulation by means of a motorized blower
● Microprocessor based PID Controller with Pt100 sensor with resolution1 ° C & accuracy +- 1 ° C
● Electrically operated on 230 V AC
Heating Mantles
Description
The RIVOTEK heating mantles are manufactured with heating surface which are resilient and can hug the flasks to take several size or multi size flasks in the same mantle as indicated in the table below. The size of 10 litres has two heating circuits and the size of 20 ltrs have 3 heating circuits. When heating a small flask or when the contents of the flask are low, the upper heating circuits can be switched off by a switch or switches provided on the outer metal case.