| Cat. No | Dimension in ( inches) | Dimension in (cm) | Rating in (KW) |
|---|---|---|---|
| 50020 0008 | 8″ | 20 | 1.2 kw |
| 50020 0009 | 9″ | 22 | 1.5 kw |
| 50020 0012 | 12″ | 30 | 2.0 kw |
Riviera Hot Plate (Round) – Thermostatic Control
₹100.00
Description
We are dealing in the manufacture, supply, distribution of Hot Plate (Round) – Thermostatic Control. The offered hot plate is provided with a round surface heating plate material. Our offered hot plate is fitted with thermostat controller for measuring and maintaining the temperature. The offered hot plate is able to function over a wide range of temperature. Our offered hot plate is an electric energy efficient device.
Features:
● Control of temperature overshoot
● Accurate proportional temperature control
● Long lasting
Specifications:
● Round surface heating plate
● Body made of MS Powder coated
● Top Plate made of cast iron
● Temp. upto 350 ° C
● Fitted with Thermostatic Control
Description
Related products
Portable Oil free vaccum Pumps
Description
Salient Features:
● No Lubrication required.
● Noiseless.
● Absolutely portable.
● Totally oil free construction.
● Practically maintenance free.
● All parts made from Special graded aluminium die cast material for
light weight and good strength.
● Diaphragms are made of special 2 ply Nylon, reinforced neoprene rubber,.
● Special diaphragms are available (Teflon, Viton) on request at extra cost.
● Valves made of SS 316 material.
● Built in micro suction filter.
● Extra Large bearings for trouble free and smooth running.
● Pumps available with single as well as three phase motors.
● Pumps available with flame proof motors (Cat. No. 7001 0012).
● Pumps available with 12/24/48 volts DC supply (Cat no.7001 0011).
Please specify voltage while ordering.
● Pumps available with Chemical resistive parts( PP, Teflon contact parts)
(Cat. No. 7001 0007/8)
Test Tube Rotator
Description
Specifications:
● Body material is MS powder coated
● Dimensions mm 500 L x 250 D x 300 H
● Speed Variable from 5 - 50 RPM. (Without load)
● Permanent magnet DC geared motor.
● Noise-free silent operation.
● Constant current speed control circuit for steady speed.
● Digital Indication of speed (Optional)
● Electronic Timer (Optional)
Rivotek Hybridization Oven
Description
Specifications:
● Interior Material - SS
● Exterior Material - MS coated with Epoxy Powder paint.
● Temperature range (ambient +5) to 90 ° C is Controlled by Solid -state time proportional
temperature controller cum digital display using PT 100 sensor.
● A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed
or removed from the rotor mechanism.
● One bottle can be taken out without removing the carrier. The carrier rotates with the
Bottles parallel to the door at variable speed of 2 - 15 RPM.
● Observation Viewing Glass Window is provided
● Permanent Magnet Geared DC motor with 25 mm dia. Motion
● Carrier speed 2- 15 RPM
Bod Incubator Shaker
Description
BOD Incubator Shaker, Rivotek
In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast.
SPECIFICATIONS :
Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated.
Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature.
Display Control : Microprocessor based PID control of by using PT 100 Sensor.
Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm.
Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature.
Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C.
Observation : Transparent toughened glass door and outer door key lockable.
Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel.
Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration.
Feet : Castor wheels.
Mains Power : Works on 230 V AC single phase 50Hz.
SPECIFICATIONS :
Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output.
RPM : 50 to 200 RPM. ( without Load Approximately).
Volt Meter : With LCD Display for better view.
Muffle Furnace
Description
Specifications:
● Outer body – MS powder coated for STD Model & SS 304 for GMP Model
● Inner body – Ceramic Muffle Construction for STD Model & GMP model
● Temperature Range up to 1100 ° C, Working temperature up to 950 ° C
● Provided with digital temperature controller/indicator with accuracy ± 5.0 ° C.
● Kanthal wire for longer life.
● The furnace is designed with high degree of insulation consisting of four layers resulting in very low heat losses and lesser atmospheric heating as under:
a) Ceramic wool blanket
b) Mineral wool
c) Ceramic bricks, light in weight and of better quality
● Electrically operated on 230V/50Hz
Rivotek Autoclave Fully Automatic, GMP Model
Description
Features:
● Low water level cut off system
● Pressure gauge fitment configuration
● Provided with steam releasing safety valves
Specifications:
● Double body has single chamber for steam and water, covered externally by outer shell
● Inner body heavy gauge SS316 Outer shell SS304
● Lid made up of thick SS316 designed to withstand pressure: up to 30PSI
● Operating pressure: 15 to 22 PSI
● Complete unit with automatic initial air purging, digital temperature controller and indicator: 0.1 ° C resolution, with electronic digital timer range 0-99 minutes
● Autoclaving time cycle automatically starts when set temperature is achieved
● Automatic steam release when autoclaving cycle completes
● Low water level cutoff system prevents heater from burning out
● Fitted with pressure gauge, safety valve and steam release valve
● Factory set: 121.0 ° C (15 PSI) with built-in digital adjustable timer with auto cut-off
● Electrically operated: 230 V AC/50 Hz
