Rivotek Hybridization Oven

Description BOD Incubator Shaker, Rivotek In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast. SPECIFICATIONS : Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated. Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature. Display Control : Microprocessor based PID control of by using PT 100 Sensor. Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm. Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm. Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature. Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C. Observation : Transparent toughened glass door and outer door key lockable. Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel. Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration. Feet : Castor wheels. Mains Power : Works on 230 V AC single phase 50Hz. SPECIFICATIONS : Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle. VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output. RPM : 50 to 200 RPM. ( without Load Approximately). Volt Meter : With LCD Display for better view.

Description The RIVOTEK kjehldhal apparatus is suitable to heat soxhlet flask of different sizes. It is made up of thick gauge fresh c.r.c.a. sheets, chemically treated to remove all oil, grease etc. It is painted with primer followed by two coats of duco automotive paints. The elements are made up of best quality 80/20 nichrome wire of appropriate gauge enclosed in multiple fiberglass sleeves, reinforced with rope and attached to fiberglass knitted fabric support to the bottom of the flask. The soxhlet unit is provided with two vertical and a horizontal rod along with two boss heads for the fixation of soxhlet unit. The heating elements have individual energy regulators to control temperature. Pilot lamps indicate working of the elements.

Description Touch Screen Ultrasonic Processor (Sonicator), Rivotek This is the new generation series of probe sonicator with uniform ultrasonic frequency 20khz and 30khz. The enclosure is soundproof with portable design. The height adjustment mechanism adds more ergonomics to the design. The TFT touch screen display with user friendly interface and PLC are programmed in a way to give advance features such as Power Amplitude control, 8 Sample processing profiles, data logging of date and Time vs temperature. This equipment is designed to handle temperature-controlled sonication tasks with temperature range from Ambient 28 ° C to 70 ° C. It also has feature of programmable timer up to 99 minutes. This product finds its application in wide range of industries including pharmaceuticals, consmetics, food processing ,nano technology labs , defence Sectors amongst others.

Description The RIVOTEK heating mantles are manufactured with heating surface which are resilient and can hug the flasks to take several size or multi size flasks in the same mantle as indicated in the table below. The size of 10 litres has two heating circuits and the size of 20 ltrs have 3 heating circuits. When heating a small flask or when the contents of the flask are low, the upper heating circuits can be switched off by a switch or switches provided on the outer metal case.