Rivotek Incubator with Micro Plate Shaker

Description The RIVOTEK heating mantles are manufactured with heating surface which are resilient and can hug the flasks to take several size or multi size flasks in the same mantle as indicated in the table below. The size of 10 litres has two heating circuits and the size of 20 ltrs have 3 heating circuits. When heating a small flask or when the contents of the flask are low, the upper heating circuits can be switched off by a switch or switches provided on the outer metal case.

Description BOD Incubator Shaker, Rivotek In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast. SPECIFICATIONS : Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated. Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature. Display Control : Microprocessor based PID control of by using PT 100 Sensor. Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm. Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm. Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature. Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C. Observation : Transparent toughened glass door and outer door key lockable. Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel. Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration. Feet : Castor wheels. Mains Power : Works on 230 V AC single phase 50Hz. SPECIFICATIONS : Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle. VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output. RPM : 50 to 200 RPM. ( without Load Approximately). Volt Meter : With LCD Display for better view.

Description Specifications: ●  Ultrasonic Generator ●  Solid state design with auto-tuning ●  Frequency 30 KHz +- 3 KHz (Factory Set) ●  Digital Cyclic Timer is provided ●  Probe Titanium probe tip ●  Ultrasonic Power 120 / 250 Watts ●  Electric Supply 230 V AC, 50Hz, single phase

Description Specifications: ●  Body Material - MS Painted with Epoxy Powder. ●  Single Channel ●  Stage made up of cast aluminum with Black epoxy powder paint ●  Rollers of Cast Nylon ●  Supplied with 1 meter transparent silicon tube ●  Reversible flow control ●  Pumps different flow rate are available