Rivotek Ultrasonic Cleaner
₹100.00
Description
Specifications:
● Bath Material: SS 304
● Outer Body Material & Lid: SS304
● Ultrasonic Generator: – Advanced latest MOSFET/IGBT based SMPS
● Frequency:- 30 ± 3 KHz
● Transducer: – Imported make PZT crystals bonded on the base of the tank with weld bond technique
● SS Basket:- Provided
● Timer-Digital Timer is provided
vElectric supply: – 230V/ 50Hz AC, single phase.
● Drain: – Drain valve provided at the rear side of the tank (not included for 1.5 liter model)
Related products
Bacteriological Incubator
Description
Rivotek(TM) Bacteriological Incubator - GMP Model:
Specifications
● Double walled Incubator
● Outer body - SS 304
● Inner Body - SS 304
● Gap between 2 walls filled with glass wool.
● Inner full-length acrylic door is provided.
● Supplied with SS trays
● Temperature range: 5 ° C above ambient (room temperature) to 60 ° C.
● Forced air circulation by means of a motorized blower
● PID Controller with Pt100 sensor with resolution: 0.1 ° C and accuracy: +- 0.5 ° C.
● Electrically operated on 230 V AC.
Rivotek Autoclave Fully Automatic, GMP Model
Description
Features:
● Low water level cut off system
● Pressure gauge fitment configuration
● Provided with steam releasing safety valves
Specifications:
● Double body has single chamber for steam and water, covered externally by outer shell
● Inner body heavy gauge SS316 Outer shell SS304
● Lid made up of thick SS316 designed to withstand pressure: up to 30PSI
● Operating pressure: 15 to 22 PSI
● Complete unit with automatic initial air purging, digital temperature controller and indicator: 0.1 ° C resolution, with electronic digital timer range 0-99 minutes
● Autoclaving time cycle automatically starts when set temperature is achieved
● Automatic steam release when autoclaving cycle completes
● Low water level cutoff system prevents heater from burning out
● Fitted with pressure gauge, safety valve and steam release valve
● Factory set: 121.0 ° C (15 PSI) with built-in digital adjustable timer with auto cut-off
● Electrically operated: 230 V AC/50 Hz
Bod Incubator Shaker
Description
BOD Incubator Shaker, Rivotek
In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast.
SPECIFICATIONS :
Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated.
Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature.
Display Control : Microprocessor based PID control of by using PT 100 Sensor.
Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm.
Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature.
Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C.
Observation : Transparent toughened glass door and outer door key lockable.
Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel.
Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration.
Feet : Castor wheels.
Mains Power : Works on 230 V AC single phase 50Hz.
SPECIFICATIONS :
Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output.
RPM : 50 to 200 RPM. ( without Load Approximately).
Volt Meter : With LCD Display for better view.
Laboratory Hot Air Oven
Description
We have come with the Laboratory Oven - Std Model for our customers. The offered ovens are widely used for annealing, die-bond curing, drying, Polyimide baking, sterilizing and other industrial laboratory functions. Along with a high operating temperature, the offered ovens come with a fan convection for rapid heating & excellent uniformity. Moreover, the stainless steel liners have a good resistance to chemical damages.
Features:
● High operating temperature
● Comes with rapid heating property
● Resistance to chemical damages
Other Details:
● Double walled construction
● Outer Body material is MS duly powder coated
● Inner Body- SS LM 304
● Gap between 2 walls filled with glass wool
● Supplied with SS trays
● Temperature range 5 ° C above ambient (room Temperature) to 250 ° C
● Forced air circulation by means of a motorized blower
● Microprocessor based PID Controller with Pt100 sensor with resolution1 ° C & accuracy +- 1 ° C
● Electrically operated on 230 V AC
