| Catalogue No. | No. of Tiers |
|---|---|
| 50051 001 | 1 |
Rocking Platform
₹100.00
Description
Specifications:
● Body material is MS powder coated
● Tray material is SS
● Shaking Speed: 8-60 strokes per min.
● Permanent Magnet Geared DC motor as driving mechanism is used
● Tray Size in mm: 300 x 275 x 25
Description
Related products
Test Tube Rotator
Description
Specifications:
● Body material is MS powder coated
● Dimensions mm 500 L x 250 D x 300 H
● Speed Variable from 5 - 50 RPM. (Without load)
● Permanent magnet DC geared motor.
● Noise-free silent operation.
● Constant current speed control circuit for steady speed.
● Digital Indication of speed (Optional)
● Electronic Timer (Optional)
Heating Mantles
Description
The RIVOTEK heating mantles are manufactured with heating surface which are resilient and can hug the flasks to take several size or multi size flasks in the same mantle as indicated in the table below. The size of 10 litres has two heating circuits and the size of 20 ltrs have 3 heating circuits. When heating a small flask or when the contents of the flask are low, the upper heating circuits can be switched off by a switch or switches provided on the outer metal case.
Vacuum Oven (Round)
Description
We have been engaged in the manufacture, supply, distribution Vacuum Oven (Round) - STD Model. The offered vacuum oven has a powder coated outer body and a thick inner body which can withstand high temperature and high pressure. Our offered vacuum oven is provided with a digital vacuum indicator supported by a LED display. The offered oven is electric operated which is capable of maintaining high vacuum levels.
Features:
● Silicon door gasket
● Positive door clamping arrangement
● Sturdy construct
Specifications:
● Outer body- MS powder coated
● Inner Body- SS316
● Temperature range: 50 ° C to 200 ° C
● Maximum Vacuum: up to -760mm of mercury, Digital Vacuum Indicator with LED Display
● Resolution: 1 mm Hg, Accuracy: +- 1 mm Hg
● Digital temperature controller/ indicator with resolution: 1 ° C
● Accuracy +-1 ° C
● Temperature resistant toughened glass observation window on the door
● Vacuum gauge with vacuum release valve and nozzle
● Silicon door gasket and positive door clamping arrangement
● Electrically operated: 230 V/50 Hz AC
Bod Incubator Shaker
Description
BOD Incubator Shaker, Rivotek
In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast.
SPECIFICATIONS :
Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated.
Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature.
Display Control : Microprocessor based PID control of by using PT 100 Sensor.
Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm.
Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature.
Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C.
Observation : Transparent toughened glass door and outer door key lockable.
Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel.
Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration.
Feet : Castor wheels.
Mains Power : Works on 230 V AC single phase 50Hz.
SPECIFICATIONS :
Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output.
RPM : 50 to 200 RPM. ( without Load Approximately).
Volt Meter : With LCD Display for better view.
Riviera Hot Plate (Rectangular) – Thermostatic Control
Description
We have been actively engaged in the manufacture, supply, distribution Hot Plate (Rectangular) - Thermostatic Control. The offered hot plate is provided with a rectangular surface heating plate. Our offered hot plate is made from cast iron which is powder coated for making it corrosion resistance. The offered hot plate has a thermostatic control for the temperature control. Our offered hot plate is available at a very affordable price.
Features:
● Corrosion resistant
● Electric shock proof
● Beneficial for laboratory work
Other Details:
● Rectangular surface heating plate
● Body made of MS Powder coated
● Top plate made of cast iron
● Temp. up to 350 ° C
● Fitted with Thermostatic Control
Muffle Furnace
Description
Specifications:
● Outer body – MS powder coated for STD Model & SS 304 for GMP Model
● Inner body – Ceramic Muffle Construction for STD Model & GMP model
● Temperature Range up to 1100 ° C, Working temperature up to 950 ° C
● Provided with digital temperature controller/indicator with accuracy ± 5.0 ° C.
● Kanthal wire for longer life.
● The furnace is designed with high degree of insulation consisting of four layers resulting in very low heat losses and lesser atmospheric heating as under:
a) Ceramic wool blanket
b) Mineral wool
c) Ceramic bricks, light in weight and of better quality
● Electrically operated on 230V/50Hz