Ultrasonic Processor (Sonicator)
₹100.00
Description
Specifications:
● Ultrasonic Generator
● Solid state design with auto-tuning
● Frequency 30 KHz +- 3 KHz (Factory Set)
● Digital Cyclic Timer is provided
● Probe Titanium probe tip
● Ultrasonic Power 120 / 250 Watts
● Electric Supply 230 V AC, 50Hz, single phase
Related products
Bod Incubator Shaker
Description
BOD Incubator Shaker, Rivotek
In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast.
SPECIFICATIONS :
Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated.
Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature.
Display Control : Microprocessor based PID control of by using PT 100 Sensor.
Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm.
Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature.
Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C.
Observation : Transparent toughened glass door and outer door key lockable.
Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel.
Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration.
Feet : Castor wheels.
Mains Power : Works on 230 V AC single phase 50Hz.
SPECIFICATIONS :
Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output.
RPM : 50 to 200 RPM. ( without Load Approximately).
Volt Meter : With LCD Display for better view.
Rivotek Hybridization Oven
Description
Specifications:
● Interior Material - SS
● Exterior Material - MS coated with Epoxy Powder paint.
● Temperature range (ambient +5) to 90 ° C is Controlled by Solid -state time proportional
temperature controller cum digital display using PT 100 sensor.
● A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed
or removed from the rotor mechanism.
● One bottle can be taken out without removing the carrier. The carrier rotates with the
Bottles parallel to the door at variable speed of 2 - 15 RPM.
● Observation Viewing Glass Window is provided
● Permanent Magnet Geared DC motor with 25 mm dia. Motion
● Carrier speed 2- 15 RPM
Rivotek Ultrasonic Cleaner
Description
Specifications:
● Bath Material: SS 304
● Outer Body Material & Lid: SS304
● Ultrasonic Generator: - Advanced latest MOSFET/IGBT based SMPS
● Frequency:- 30 ± 3 KHz
● Transducer: - Imported make PZT crystals bonded on the base of the tank with weld bond technique
● SS Basket:- Provided
● Timer-Digital Timer is provided
vElectric supply: - 230V/ 50Hz AC, single phase.
● Drain: - Drain valve provided at the rear side of the tank (not included for 1.5 liter model)
Muffle Furnace
Description
Specifications:
● Outer body – MS powder coated for STD Model & SS 304 for GMP Model
● Inner body – Ceramic Muffle Construction for STD Model & GMP model
● Temperature Range up to 1100 ° C, Working temperature up to 950 ° C
● Provided with digital temperature controller/indicator with accuracy ± 5.0 ° C.
● Kanthal wire for longer life.
● The furnace is designed with high degree of insulation consisting of four layers resulting in very low heat losses and lesser atmospheric heating as under:
a) Ceramic wool blanket
b) Mineral wool
c) Ceramic bricks, light in weight and of better quality
● Electrically operated on 230V/50Hz
Portable Oil free vaccum Pumps
Description
Salient Features:
● No Lubrication required.
● Noiseless.
● Absolutely portable.
● Totally oil free construction.
● Practically maintenance free.
● All parts made from Special graded aluminium die cast material for
light weight and good strength.
● Diaphragms are made of special 2 ply Nylon, reinforced neoprene rubber,.
● Special diaphragms are available (Teflon, Viton) on request at extra cost.
● Valves made of SS 316 material.
● Built in micro suction filter.
● Extra Large bearings for trouble free and smooth running.
● Pumps available with single as well as three phase motors.
● Pumps available with flame proof motors (Cat. No. 7001 0012).
● Pumps available with 12/24/48 volts DC supply (Cat no.7001 0011).
Please specify voltage while ordering.
● Pumps available with Chemical resistive parts( PP, Teflon contact parts)
(Cat. No. 7001 0007/8)
Vacuum Oven (Round)
Description
We have been engaged in the manufacture, supply, distribution Vacuum Oven (Round) - STD Model. The offered vacuum oven has a powder coated outer body and a thick inner body which can withstand high temperature and high pressure. Our offered vacuum oven is provided with a digital vacuum indicator supported by a LED display. The offered oven is electric operated which is capable of maintaining high vacuum levels.
Features:
● Silicon door gasket
● Positive door clamping arrangement
● Sturdy construct
Specifications:
● Outer body- MS powder coated
● Inner Body- SS316
● Temperature range: 50 ° C to 200 ° C
● Maximum Vacuum: up to -760mm of mercury, Digital Vacuum Indicator with LED Display
● Resolution: 1 mm Hg, Accuracy: +- 1 mm Hg
● Digital temperature controller/ indicator with resolution: 1 ° C
● Accuracy +-1 ° C
● Temperature resistant toughened glass observation window on the door
● Vacuum gauge with vacuum release valve and nozzle
● Silicon door gasket and positive door clamping arrangement
● Electrically operated: 230 V/50 Hz AC