Vacuum Oven (Round)

Description BOD Incubator Shaker, Rivotek In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast. SPECIFICATIONS : Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated. Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature. Display Control : Microprocessor based PID control of by using PT 100 Sensor. Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm. Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm. Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature. Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C. Observation : Transparent toughened glass door and outer door key lockable. Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel. Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration. Feet : Castor wheels. Mains Power : Works on 230 V AC single phase 50Hz. SPECIFICATIONS : Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle. VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output. RPM : 50 to 200 RPM. ( without Load Approximately). Volt Meter : With LCD Display for better view.

Description The RIVOTEK kjehldhal apparatus is suitable to heat soxhlet flask of different sizes. It is made up of thick gauge fresh c.r.c.a. sheets, chemically treated to remove all oil, grease etc. It is painted with primer followed by two coats of duco automotive paints. The elements are made up of best quality 80/20 nichrome wire of appropriate gauge enclosed in multiple fiberglass sleeves, reinforced with rope and attached to fiberglass knitted fabric support to the bottom of the flask. The soxhlet unit is provided with two vertical and a horizontal rod along with two boss heads for the fixation of soxhlet unit. The heating elements have individual energy regulators to control temperature. Pilot lamps indicate working of the elements.

Description We have been actively engaged in the manufacture, supply, distribution Hot Plate (Rectangular) - Thermostatic Control. The offered hot plate is provided with a rectangular surface heating plate. Our offered hot plate is made from cast iron which is powder coated for making it corrosion resistance. The offered hot plate has a thermostatic control for the temperature control. Our offered hot plate is available at a very affordable price. Features: ●  Corrosion resistant ●   Electric shock proof ●  Beneficial for laboratory work Other Details: ●  Rectangular surface heating plate ●  Body made of MS Powder coated ●  Top plate made of cast iron ●  Temp. up to 350 ° C ●  Fitted with Thermostatic Control

Description Specifications: ●  Bath Material: SS 304 ●  Outer Body Material & Lid: SS304 ●  Ultrasonic Generator: - Advanced latest MOSFET/IGBT based SMPS ●  Frequency:- 30 ± 3 KHz ●  Transducer: - Imported make PZT crystals bonded on the base of the tank with weld bond technique ●  SS Basket:- Provided ●  Timer-Digital Timer is provided vElectric supply: - 230V/ 50Hz AC, single phase. ●  Drain: - Drain valve provided at the rear side of the tank (not included for 1.5 liter model)