Rivotek Autoclave Fully Automatic, GMP Model

Description BOD Incubator Shaker, Rivotek In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast. SPECIFICATIONS : Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated. Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature. Display Control : Microprocessor based PID control of by using PT 100 Sensor. Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm. Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm. Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature. Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C. Observation : Transparent toughened glass door and outer door key lockable. Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel. Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration. Feet : Castor wheels. Mains Power : Works on 230 V AC single phase 50Hz. SPECIFICATIONS : Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle. VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output. RPM : 50 to 200 RPM. ( without Load Approximately). Volt Meter : With LCD Display for better view.

Description We are very well skilled in the manufacture, supply, distribution of Bod Incubator - GMP Model. The offered biochemical oxygen demand incubator is an ideal storage for sensitive cultures. Our offered incubator is provided with very strong inner and outer cabinets. The offered incubator is provided with eco friendly refrigeration technology of CFC compressor. Our offered incubator maintains a high accuracy over a range of temperature. Features: ●   Non volatile memory for the set point ●   Castor wheels ●   Acrylic doors Specifications: ●  Interior cabinet: SS 304 ●  Exterior cabinet: SS 304 ●  Temperature range: 5 ° C to 60 ° C ●  Accuracy/ Uniformity: +- 0.5 ° C/ +- 1 ° C ●  Safety: Provided to cut off heater above 70 ° C ●  Display/ Control: PID Controller with resolution 0.1 ° C ●  Accuracy: +- 0.5 ° C with Non-Volatile storage memory for the set Point ●  Refrigeration: CFC free compressor utilizing R134a Eco-friendly refrigeration ●   Observation: Inner transparent acrylic door and outer door key lockable ●  Feet: Castor wheels ●  Mains Power: 230 V/50 Hz AC

Description Specifications: ●  Outer body – MS powder coated for STD Model & SS 304 for GMP Model ●  Inner body – Ceramic Muffle Construction for STD Model & GMP model ●  Temperature Range up to 1100 ° C, Working temperature up to 950 ° C ●  Provided with digital temperature controller/indicator with accuracy ± 5.0 ° C. ●  Kanthal wire for longer life. ●  The furnace is designed with high degree of insulation consisting of four layers resulting in very low heat losses and lesser atmospheric heating as under: a) Ceramic wool blanket b) Mineral wool c) Ceramic bricks, light in weight and of better quality ●  Electrically operated on 230V/50Hz

Description Specifications: ●  Interior Material - SS ●  Exterior Material - MS coated with Epoxy Powder paint. ●  Temperature range (ambient +5) to 90 ° C is Controlled by Solid -state time proportional temperature controller cum digital display using PT 100 sensor. ●  A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed or removed from the rotor mechanism. ●  One bottle can be taken out without removing the carrier. The carrier rotates with the Bottles parallel to the door at variable speed of 2 - 15 RPM. ●  Observation Viewing Glass Window is provided ●  Permanent Magnet Geared DC motor with 25 mm dia. Motion ●  Carrier speed 2- 15 RPM