Rivotek Autoclave Fully Automatic, GMP Model

Description BOD Incubator Shaker, Rivotek In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast. SPECIFICATIONS : Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated. Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature. Display Control : Microprocessor based PID control of by using PT 100 Sensor. Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm. Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm. Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature. Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C. Observation : Transparent toughened glass door and outer door key lockable. Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel. Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration. Feet : Castor wheels. Mains Power : Works on 230 V AC single phase 50Hz. SPECIFICATIONS : Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle. VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output. RPM : 50 to 200 RPM. ( without Load Approximately). Volt Meter : With LCD Display for better view.

Description The RIVOTEK kjehldhal apparatus is suitable to heat soxhlet flask of different sizes. It is made up of thick gauge fresh c.r.c.a. sheets, chemically treated to remove all oil, grease etc. It is painted with primer followed by two coats of duco automotive paints. The elements are made up of best quality 80/20 nichrome wire of appropriate gauge enclosed in multiple fiberglass sleeves, reinforced with rope and attached to fiberglass knitted fabric support to the bottom of the flask. The soxhlet unit is provided with two vertical and a horizontal rod along with two boss heads for the fixation of soxhlet unit. The heating elements have individual energy regulators to control temperature. Pilot lamps indicate working of the elements.

Description We have come with the Laboratory Oven - Std Model for our customers. The offered ovens are widely used for annealing, die-bond curing, drying, Polyimide baking, sterilizing and other industrial laboratory functions. Along with a high operating temperature, the offered ovens come with a fan convection for rapid heating & excellent uniformity. Moreover, the stainless steel liners have a good resistance to chemical damages. Features: ●  High operating temperature ●  Comes with rapid heating property ●  Resistance to chemical damages Other Details: ●  Double walled construction ●  Outer Body material is MS duly powder coated ●  Inner Body- SS LM 304 ●  Gap between 2 walls filled with glass wool ●  Supplied with SS trays ●  Temperature range 5 ° C above ambient (room Temperature) to 250 ° C ●  Forced air circulation by means of a motorized blower ●  Microprocessor based PID Controller with Pt100 sensor with resolution1 ° C & accuracy +- 1 ° C ●  Electrically operated on 230 V AC

Description Specifications: ●  Body material is MS powder coated ●  Tray material is SS ●  Shaking Speed: 8-60 strokes per min. ●  Permanent Magnet Geared DC motor as driving mechanism is used ●  Tray Size in mm: 300 x 275 x 25