Rivotek Ultrasonic Cleaner
₹100.00
Description
Specifications:
● Bath Material: SS 304
● Outer Body Material & Lid: SS304
● Ultrasonic Generator: – Advanced latest MOSFET/IGBT based SMPS
● Frequency:- 30 ± 3 KHz
● Transducer: – Imported make PZT crystals bonded on the base of the tank with weld bond technique
● SS Basket:- Provided
● Timer-Digital Timer is provided
vElectric supply: – 230V/ 50Hz AC, single phase.
● Drain: – Drain valve provided at the rear side of the tank (not included for 1.5 liter model)
Related products
Rivotek Hybridization Oven
Description
Specifications:
● Interior Material - SS
● Exterior Material - MS coated with Epoxy Powder paint.
● Temperature range (ambient +5) to 90 ° C is Controlled by Solid -state time proportional
temperature controller cum digital display using PT 100 sensor.
● A carrier to hold bottles (6 nos. of 60 mm dia x 200 mm length) can be easily placed
or removed from the rotor mechanism.
● One bottle can be taken out without removing the carrier. The carrier rotates with the
Bottles parallel to the door at variable speed of 2 - 15 RPM.
● Observation Viewing Glass Window is provided
● Permanent Magnet Geared DC motor with 25 mm dia. Motion
● Carrier speed 2- 15 RPM
Bacteriological Incubator
Description
Rivotek(TM) Bacteriological Incubator - GMP Model:
Specifications
● Double walled Incubator
● Outer body - SS 304
● Inner Body - SS 304
● Gap between 2 walls filled with glass wool.
● Inner full-length acrylic door is provided.
● Supplied with SS trays
● Temperature range: 5 ° C above ambient (room temperature) to 60 ° C.
● Forced air circulation by means of a motorized blower
● PID Controller with Pt100 sensor with resolution: 0.1 ° C and accuracy: +- 0.5 ° C.
● Electrically operated on 230 V AC.
Rivotek Incubator With Orbital Shaker
Description
Our business establishment is one of the trusted manufacturer, supplier, distributorof Bench Top Incubator (See Through Acrylic). The offered incubator is used for growing and maintaining microbiological cultures and cell cultures. Our offered incubator is very efficient in maintaining optimal temperature, humidity and gas content. The offered incubator is very beneficial for experimental works in cell biology and micro biology.
Other Details:
● MS Powder coated outer body & SS 304 Inner body
● Temperature Range: (Ambient+5) to 60 ° C
● Digital PID Controller with Pt 100 sensor having accuracy: +- 0.1 ° C
● The recirculation fan fitted inside achieves uniformity of Temperature
● 1 sq ft glass window on fron door for transparent view
● Built in LED lighting.
Bod Incubator Shaker
Description
BOD Incubator Shaker, Rivotek
In order to provide optimal conditions for cell growth, some type of agitation or shaking is necessary to incorporate oxygen and evenly distribute nutrients throughout the culture media. That's often done by placing a separate shaker inside an incubator, but incubator shakers combine those functions for a more convenient and efficient setup. The incubator shaker can be used for growth of just about any kind of cell including bacterial cultures, tissue cultures, and yeast.
SPECIFICATIONS :
Material of Construction : Interior cabinet- SS 304 & Exterior cabinet: MS powder coated.
Insulation : Double walled construction with 70mm thick ‘PUF’ insulation provided in between the walls to prevent loss of temperature.
Display Control : Microprocessor based PID control of by using PT 100 Sensor.
Temperature range: 5 ° C to 60 ° C Accuracy: ± 1.0 ° C
Shaking Platform Size : For conical flask SS Platform size with 425 x 425 mm.
Additional steel rod Tray : For Petri dishes and small beakers, size with 425 x 425 mm.
Exceptional Uniformity : Motorized blower at back side of the chamber develops unique Air flow system which ensures maximum uniform temperature.
Safety thermostat : Safety Thermostat provided to cut off heater above 70 ° C.
Observation : Transparent toughened glass door and outer door key lockable.
Samples viewing : Built in lightning attachment with low wattage CFL Lamp provided with External switch on the front panel.
Refrigeration : CFC free compressor utilizing R134a Eco-friendly refrigeration.
Feet : Castor wheels.
Mains Power : Works on 230 V AC single phase 50Hz.
SPECIFICATIONS :
Motor : Brushless 3 phase Induction Motor, to operate 24 x 7 cycle.
VFD Drive : VFD (Variable Frequency Drive) of 230 V, I Phase Input – III Phase output.
RPM : 50 to 200 RPM. ( without Load Approximately).
Volt Meter : With LCD Display for better view.
Muffle Furnace
Description
Specifications:
● Outer body – MS powder coated for STD Model & SS 304 for GMP Model
● Inner body – Ceramic Muffle Construction for STD Model & GMP model
● Temperature Range up to 1100 ° C, Working temperature up to 950 ° C
● Provided with digital temperature controller/indicator with accuracy ± 5.0 ° C.
● Kanthal wire for longer life.
● The furnace is designed with high degree of insulation consisting of four layers resulting in very low heat losses and lesser atmospheric heating as under:
a) Ceramic wool blanket
b) Mineral wool
c) Ceramic bricks, light in weight and of better quality
● Electrically operated on 230V/50Hz
Kjeldhal Apparatus
Description
The RIVOTEK kjehldhal apparatus is suitable to heat soxhlet flask of different sizes. It is made up of thick gauge fresh c.r.c.a. sheets, chemically treated to remove all oil, grease etc. It is painted with primer followed by two coats of duco automotive paints.
The elements are made up of best quality 80/20 nichrome wire of appropriate gauge enclosed in multiple fiberglass sleeves, reinforced with rope and attached to fiberglass knitted fabric support to the bottom of the flask.
The soxhlet unit is provided with two vertical and a horizontal rod along with two boss heads for the fixation of soxhlet unit. The heating elements have individual energy regulators to control temperature. Pilot lamps indicate working of the elements.
Digital Heating Mantles
Description
Construction of these laboratory heating mantle are similar to standard heating mantle but the temperature is controlled by digital temperature controller-cum- indicator.
These laboratory heating mantles are designed to take only one size of flask. Various sizes are available to fit around bottom flasks of capacity from 100 ml to 2000 ml. The snug fit of the heating surface, which is in close contact with the flask, ensures good thermal efficiency.